Kyosho Mini Inferno Aftermarket Rim and Radial Tyre Set PMIF512887F/R by GPM  [PMIF512887F/R]

Kyosho Mini Inferno Plastic Front/Rear Sinkage Rims (5 Vacuum) With Radial Tires - 1pr set - GPM PMIF512887F/R
Price:
USD$4.80
Brand:
GPM
Model:
PMIF512887F/R
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Technical overview for Mini Inferno rims

This aftermarket wheel and tyre assembly is developed for the Kyosho Mini Inferno chassis and is referenced by part PMIF512887F/R. The kit pairs precision-moulded plastic front and rear sinkage-style rims (5 vacuum profile) with radial-pattern tyres to provide an alternative tyre profile without changing hub geometry.

Designed as direct-fit replacements, the rims maintain standard wheel mounting alignment while altering tyre sidewall support and rim stiffness characteristics. These changes translate to measurable differences in steering feedback and mid-corner traction that can be used to tune handling on small-scale setups.

Fitting requires standard wheel removal and reinstallation procedures: remove the factory wheel, reuse the existing hub fasteners where compatible, and mount the new rim and tyre assembly. No special adapters are specified for conventional Mini Inferno configurations.

For setup, verify ride height, suspension droop and toe after installation. Use short test runs to assess the effect on turn-in and cornering, and make incremental adjustments to restore handling neutrality.

What tolerance checks should I perform on fitment?

Confirm hub bore clearance and stud engagement, then spin the wheel to check for runout. Minor trimming of excess flash on the rim bead may be required for perfect seating.

How will these rims alter handling compared with stock wheels?

The sinkage rim profile changes sidewall support and can reduce or increase bite depending on setup. Expect variations in steering response and mid-corner grip that are addressable through toe and ride height changes.

Any recommended tuning steps after fitting?

Start with factory alignment settings, then perform controlled test runs. Adjust toe in small increments and check droop and ride height to refine balance with the new rim and radial tyre combination.