Kyosho Inferno MP7.5 Rear Gearbox Alloy Lower Arm Bulk 3 Degree - MP75011R3 by GPM  [MP75011R3]

Kyosho Inferno MP 7.5 Option Alloy Lower Arm Bulk For Rear Gear Box(3 Degree ) - 1pc - GPM MP75011R3
Price:
USD$7.50
Brand:
GPM
Model:
MP75011R3
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision alloy lower arm bulk for rear gearbox

This alloy lower arm bulk is engineered for the rear gearbox area of the Kyosho Inferno MP7.5 chassis and is supplied as a single unit. It replaces the OEM lower arm bulk and establishes a fixed 3 Degree orientation to provide repeatable rear suspension geometry for tuning purposes.

The component locates into the rear gearbox mounting points where it interfaces with the lower suspension arms and gearbox housing. Intended as an upgrade part, it allows careful adjustment of rear camber and toe when combined with alternative arm lengths and shock mounting choices.

Constructed in alloy for improved stiffness over plastic, the part helps the rear end retain alignment under load during high speed cornering. Install using standard RC tools, verify fastener torque settings, and confirm spur and pinion clearance to prevent interference with the gearbox assembly.

What mounting points are used for installation?

Install the bulk at the rear gearbox mounting bosses where the lower arms attach. Ensure locating features seat fully and that mounting fasteners engage the original threads or inserts.

How does the fixed 3 Degree setting affect setup work?

The fixed 3 Degree orientation provides a consistent baseline for camber and toe behaviour; use it as a known reference when changing arm lengths, toe links or shock positions to dial handling precisely.

Are there any clearance checks recommended?

After fitting, rotate the drivetrain by hand to confirm no contact between the bulk and spur or pinion, inspect surrounding components for interference, and re-torque hardware after initial track use.