HPI Bullet 3.0 MT/ST Precision Alloy Rear Suspension Arm GPM BMT056 by GPM  [BMT056]

HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056
Price:
USD$19.90
Brand:
GPM
Model:
BMT056
GTIN:
4894538028683
Condition:
Brand New
Write a review
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"
alt="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056" title="HPI Bullet 3.0 Mt And St Alloy Rear Suspension Arm - 1pr set - GPM BMT056"

Precision alloy rear arm for HPI Bullet 3.0

The GPM BMT056 is a precision-machined alloy rear suspension arm designed for HPI Bullet 3.0 MT and ST platforms. As a direct replacement, it preserves factory geometry while providing a higher stiffness alternative to injection-moulded plastic arms for nitro short-course applications.

This technical overview covers fitment, installation checks, and the component's impact on suspension tuning. The alloy construction improves repeatable geometry under load, reduces deflection in high-speed cornering, and offers enhanced durability for frequent competitive or club use.

Specifications

  • Item: Rear suspension arm, 1pr set
  • Material: Alloy
  • Model Number: GPM BMT056
  • Compatibility: HPI Bullet 3.0 MT and ST

During installation follow workshop best practice: verify ball stud integrity, confirm pivot pin tolerances, torque mounting hardware to spec, and validate toe and camber settings after final assembly to ensure predictable dynamic behaviour.

Is this compatible with stock Bullet 3.0 rear geometry?

Yes. The arm is manufactured to match the stock mounting interface for HPI Bullet 3.0 MT and ST, allowing direct replacement without chassis modification.

Do alloy arms require different suspension tuning?

Alloy reduces component compliance, so minor damper or spring adjustments may be required to restore balance and to control increased feedback into the chassis.

What inspection routines are recommended?

Regularly check pivot pin fit, mounting screw torque, and mating surfaces for wear; replace worn hardware promptly to avoid developing play.

Is corrosion protection needed for alloy parts?

Aluminium alloys are corrosion resistant but benefit from light protective treatments in harsh environments; clean and dry components after exposure to moisture or grit.