GT4 TEC 2.0 Precision Tie Rod Kit GT160 by GPM  [GT160]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160
Price:
USD$18.90
Brand:
GPM
Model:
GT160
GTIN:
4894538298529
Condition:
Brand New
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Tie Rods - 31pc set - GPM GT160"

Precision tie rod assembly for GT4 TEC

This 31 piece tie rod assembly is an RC-scale steering upgrade engineered for TRAXXAS 4WD GT4 TEC 2.0 applications, produced from 6061 T6 aluminium to balance low mass with structural stiffness for improved steering consistency.

The design uses counter-clockwise threaded adjusters to provide reliable, incremental length changes so toe and steering response can be tuned without altering the stock C-hub geometry. White Delrin collars are supplied to locate in the original C-hub holes and ensure repeatable positioning during setup and maintenance.

Intended as a durable, low-mass alternative to factory plastic links, this kit helps reduce flex and improves steering feedback for controlled lap timing or precision roadwork. All references are to RC-scale components only.

Hardware supplied

  • Stainless Steel Round Head Screws 3x18 - 2pcs
  • Stainless Steel Round Head Screws 3x16 - 2pcs
  • Stainless Steel Round Head Screws 3x14 - 3pcs
  • Stainless Steel Round Head Screws 3x12 - 6pcs
  • Stainless Steel Round Head Screws 3x10 - 4pcs
  • Stainless Steel Flat Head Screws 3x14 - 1pc
  • White Delrin Collar - 4pcs

Specifications

  • Item Aluminum tie rod set
  • Material 6061 T6 aluminum
  • Model Number GT160
  • Compatibility TRAXXAS 4WD GT4 TEC 2.0

Install this precision aluminium tie rod kit to reduce link flex and achieve repeatable steering geometry when tuning TRAXXAS 4WD GT4 TEC 2.0 for performance driving.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

Compatibility and fitment details

The kit is manufactured for TRAXXAS 4WD GT4 TEC 2.0 and includes Delrin locating collars to use the existing C-hub mounting holes for direct fitment.

Adjustment practice for accurate toe

Rotate the rod ends on the counter-clockwise threaded shafts in small increments, then set the car on its wheels and measure toe. Verify settings after a short run to confirm stability.

Maintenance and servicing notes

Inspect threads and collars for wear periodically, reapply light thread lubricant if needed, and ensure screws remain torque-checked to maintain repeatable alignment.

Corrosion resistance and materials

Rods are 6061 T6 aluminium for a balance of strength and weight; the supplied fasteners are stainless steel to resist corrosion in typical hobby use.