GPM AXIAL SCX10 II Hardened Transmission Gears - SSCX27038CG Set  [SSCX27038CG]

AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG
Price:
USD$36.90
Brand:
GPM
Model:
SSCX27038CG
GTIN:
4894538266238
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG" title="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG"
alt="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG" title="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG"
alt="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG" title="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG"
alt="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG" title="AXIAL Racing SCX10 II Hard Steel Transmission Gears - 1set - GPM SSCX27038CG"

Precision hardened transmission gears for SCX10 II

This aftermarket gearset is intended for AXIAL Racing SCX10 II transmissions and is designated SSCX27038CG. The kit contains hardened steel transmission gears designed to offer improved wear resistance and consistent tooth contact under crawling loads.

Compatibility is targeted at the AXIAL Racing SCX10 II chassis; installers should verify gearbox spacing and bearing condition prior to fitment. Heat treatment and material hardness affect engagement geometry, so accurate mesh setup and backlash control are necessary to prevent premature wear.

From a technical viewpoint, hardened steel gears are selected for higher torque scenarios and for applications where altered gear ratios or performance motors increase load. Maintain correct lubrication, confirm bearing integrity, and ensure pinion alignment to preserve gear life and drivetrain efficiency.

Specifications

  • Item Hard Steel Transmission Gears (1 set)
  • Material Hard steel
  • Model Number SSCX27038CG
  • Compatibility AXIAL Racing SCX10 II

For technical rebuilds or performance-minded upgrades on the SCX10 II gearbox, these hardened steel gears provide a durable aftermarket solution when installed with precise mesh and adequate bearing support.

What tolerance checks should be performed during assembly?

Measure bearing bores and shaft endplay, verify gear face contact across the tooth, and set backlash to a small consistent value to ensure even load distribution across the gear teeth.

Do hardened gears need a specific lubricant type?

Use a metal-suitable gear grease that maintains film under shock loads; reapply and inspect after initial run-in to confirm lubricant retention and absence of metal debris.

How do these gears perform with modified ratios or stronger motors?

Hardened gears better resist wear under increased torque, but system reliability still depends on correct mesh, robust bearings, and appropriate thermal and load management.

Are additional reinforcements recommended for competition use?

Evaluate bearings and gearbox housings for reinforcement where loads exceed stock design; hardened gears are one part of improving durability but supporting components must match the increased demands.