GPM AXIAL AX2410X/3.0 AX24 XC-1 Brass 3mm Wheel Hex Hubs  [AX2410X/3.0]

AXIAL AX24 XC-1 ROCK CRAWLER BRUSHED Brass 3mm Thick Wheel Hex Hubs set - GPM AX2410X/3.0
Price:
USD$8.90
Brand:
GPM
Model:
AX2410X/3.0
GTIN:
4894538372946
Condition:
Brand New
Write a review

Precision Brass 3.0mm Hex Hubs for AXIAL AX24

This GPM aftermarket hub set is engineered for AXIAL AX24 XC-1 platforms to replace the stock plastic hex adapters with CNC-friendly brass hexes. At 3.0mm thickness the brass hubs provide enhanced wear resistance and consistent fit to couple front CVDs and the rear drive shaft to wheel mounts on 1/24 scale crawlers.

The kit contains four brass hex hubs and four 1.5x5 steel pins. Each hub weighs about 1g, offering a controlled increase in rotational mass to improve slow-speed traction and momentum control on technical terrain. Installation requires sliding the hub onto the axle hex, securing with the supplied pin and verifying axial clearance and free rotation.

Packing includes

  • Brass hex wheel hubs 3.0mm - 4 pcs
  • 1.5x5 Steel pin - 4 pcs

Original Name / Part No:

AXI31610+AXI31609

Compatible Models

  • AXIAL-1/24 AX24 XC-1 4WS CRAWLER BRUSHED RTR-AXI00003

What tolerances should I check during installation?

Verify radial runout and endplay after fitting to ensure the hub sits flush on the axle hex and does not induce binding.

Are the pins hardened or heat-treated?

The kit includes standard 1.5x5 steel pins for secure retention; inspect for straightness before reuse and replace if deformation occurs.

Recommended setup tips for competition crawling?

Pair these hubs with soft compound tyres and low gearing to exploit the added inertia for smoother torque delivery on technical sections.