Gmade R1 Rock Buggy Precision Hex Adapter 12mmx7mm GM010/12X7 by GPM  [GM010/12X7]

Technical overview

This aluminium adapter set is supplied for Gmade 1/10 R1 Rock Buggy use and carries the designation GPM GM010/12X7. The set of four adapters provides a 12mm outer hex to 7mm inner hex conversion, enabling wheels and hubs with those sizes to be matched while preserving hub alignment.

Fabricated from aluminium to resist wear and retain concentricity during repeated wheel changes, the adapters are intended for fitment adjustments and tuning where a stepped hex interface is required. They help maintain consistent mounting tolerances under normal hobby use.

Fitment is carried out by placing the adapter onto the hub hex, aligning the wheel and securing with the vehicle's existing wheel hardware. After installation, inspect wheel runout and verify clearance with suspension and body components before final use.