Gmade R1 Rock Buggy Aluminium Front/Rear Bumper Absorber GM330F/R by GPM  [GM330F/R]

Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R
Price:
USD$22.90
Brand:
GPM
Model:
GM330F/R
GTIN:
4894538057645
Condition:
Brand New
Write a review
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"
alt="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R" title="Gmade 1/10 R1 Rock Buggy Aluminium Front/Rear Bumper Absorber - 1set - GPM GM330F/R"

Precision aluminium bumper absorber for R1

Engineered for the 1/10 Gmade R1 Rock Buggy, this aluminium absorber replaces the stock interface to deliver a stiffer, repeatable mounting point that reduces play at the bumper junction.

Functionally it operates as both front and rear bumper absorbers, directing contact forces into a metal interface to help preserve alignment after impacts. Supplied as a one-set solution, it is a direct-fit hop-up for standard R1 mounting geometry.

Installation follows common workshop practice: remove factory bumper fixings, install the aluminium absorber to the original bosses, and reuse compatible fasteners. No electrical or servo configuration changes are required, as the item is strictly structural.

Specifications

  • Item: Aluminium Front/Rear Bumper Absorber - 1 set
  • Material: Aluminium
  • Model Number: GM330F/R
  • Compatibility: Gmade R1 Rock Buggy

A CNC-friendly aluminium solution aimed at enthusiasts seeking a durable, dimensionally stable bumper interface for the Gmade R1 Rock Buggy, focused on mechanical reliability and consistent fitment.

What tolerances should I expect on the mating faces?

Machined aluminium offers tighter dimensional control than injection-moulded plastic; expect consistent seating and minimal variation between parts.

Are there any recommended torque settings?

Use moderate torque appropriate for aluminium threads and avoid over-tightening; hand-tighten then apply a conservative turn with a torque driver if available to prevent stripping.

Should I apply anti-seize on metal fasteners?

A light anti-seize or suitable lubricant on steel-to-aluminium interfaces can reduce galling and aid future serviceability, used sparingly on threaded areas.

Is additional reinforcement needed for heavy-duty use?

For extreme duty or frequent high-energy impacts, consider pairing the aluminium absorber with reinforced bumper mounts or energy-absorbing elements to protect adjacent components.