GPM GM1605 Precision Aluminum Anti-thread Tie Rods for Gmade R1  [GM1605]

Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605
Price:
USD$38.90
Brand:
GPM
Model:
GM1605
GTIN:
4894538251579
Condition:
Brand New
Write a review
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"

Precision Steering Links for Gmade R1

The GPM GM1605 tie rod set provides a rugged 5mm aluminum link with an anti-thread design to minimise loosening during demanding use. These adjustable rods cover a 300mm-323mm wheelbase and are intended to stabilise steering geometry under load.

Engineering Focused Features

Designed with a focus on durability and precise alignment, the set increases link stiffness and helps keep toe settings consistent across rough surfaces. The anti-thread construction reduces the need for repeated hardware checks during extended sessions.

Compatibility and Workshop Notes

These rods are supplied as an 8 piece set and install easily with common RC tools. They are specified for the Gmade R1 Rock Buggy chassis and should integrate cleanly with stock steering mounts when set within the 300mm-323mm range.

Specifications

  • Material: Aluminum
  • Diameter: 5mm
  • Adjustable Wheelbase: 300mm-323mm
  • Quantity: 8pcs set

What tolerance should I expect for length adjustment?

Adjustable threaded sections allow for fine length setting within the stated 300mm-323mm span; check with calipers for precise matching when setting toe and thrust angles.

How do I prevent end play in service?

Inspect rod ends for wear and replace if lateral play appears. Use light lubrication on joints and apply a small amount of thread locker to the adjustment threads if sustained high impact use is expected.

Is this set compatible with drop-in servo setups?

Compatibility depends on the steering geometry; these rods are dimensioned for the Gmade R1 steering layout. Verify servo horn spacing and horn-to-link angles before final assembly.