GF01 Precision Steel King Pin Set 5mmx6.2mmXM4 - GF004S by GPM  [GF004S]

Tamiya GF01 Steel King Pin (5mmx6.2mmXM4) - 4pcs (For GF01 / TA01 / TA02 / TA03 / TL01) - GPM GF004S
Price:
USD$3.50
Brand:
GPM
Model:
GF004S
GTIN:
4894538067224
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision replacement king pins for GF01 platforms

This steel king pin kit is a precision-focused aftermarket replacement for Tamiya GF01-derived platforms, supplied as a four piece pack. The components are intended to serve as direct substitutes for original-style king pins used in steering knuckles and suspension link joints on scale RC chassis.

These steel pins are intended for maintenance or tuning situations where a more robust pin is desired. Standard installation involves removing the knuckle or link, pressing out the worn pin and installing the replacement; verify correct thread engagement and secure with the specified M4 fastener from the original assembly. Upgrading to steel pins can influence steering response and long-term wear characteristics, so inspect complementary parts during fitment and routine service.

Compatible Models

  • GF01
  • TA01
  • TA02
  • TA03
  • TL01

What tolerances should I check during fitment?

Check hole concentricity and thread engagement to ensure the pin seats squarely and the M4 fastener secures without preload that could distort the joint.

Does the pack provide enough pins for a full axle replacement?

The set contains four king pins, which typically covers a pair of knuckles or link joints depending on the chassis layout; verify your vehicle requirements before installation.

Recommended installation practice to maintain steering geometry?

Press pins straight using suitable tooling, ensure mating surfaces are clean, and confirm M4 fastener torque so the pin does not introduce play that could alter steering geometry over time.