GF01 38mm Steel Front/Rear CVD Shafts 12x6mm Hex GF1238SADT by GPM  [GF1238SADT]

Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT
Price:
USD$19.90
Brand:
GPM
Model:
GF1238SADT
GTIN:
4894538035407
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"

Technical overview of 38mm GF01 CVD shafts

This replacement front and rear CVD shaft set is specified as a direct-fit steel upgrade for the GF01 chassis. Manufactured from #45 steel and sized at 38mm, the pair includes 12x6mm hex adapters to interface with standard GF01 wheel hex mounts.

The components maintain factory GF01 mounting geometry while increasing torsional stiffness and abrasion resistance compared with softer drive parts. They are intended for 1/10 scale GF01 touring and off-road use where standard CVD length and hex adapter dimensions apply.

Assembly guidance: verify GF01 standard CVD length and 12x6mm hex compatibility before fitment, inspect and replace worn pins or bearings as required, confirm retention hardware torque, and perform an initial low-speed functional check to verify smooth operation.

Specifications

  • Item: Front/Rear CVD shaft set
  • Material: Steel #45
  • Model Number: GF1238SADT
  • Compatibility: Tamiya GF01
  • Length: 38mm
  • Includes: 12x6mm hex adapters
  • Quantity: 1 pr set

Engineers and experienced hobbyists will find this 38mm #45 steel set a reliable direct-fit option to increase drivetrain stiffness while preserving GF01 geometry; confirm component compatibility before sustained high-load use.

What tolerances should I check before installation?

Measure CVD overall length, hex adapter seating depth and hub clearance; ensure pins and bearing bores are within service limits to avoid preload or binding after fitment.

Are these intended for high-power setups?

The steel construction increases torsional capacity compared with softer parts, but compatibility with high-power applications depends on the rest of the drivetrain; check associated driveline components and bearings before heavy-duty use.

How should splines be maintained?

Keep mating splines clean and lightly lubricated where applicable, inspect for wear after the first few runs, and replace worn components to prevent rapid degradation of the assembly.

What checks after first installation?

After fitment, verify free rotation across the full suspension travel, recheck retention hardware, and confirm wheel hex seating to avoid loosening during initial operation.