For TRAXXAS E-REVO Precision Rear Bulkhead ER013A by GPM  [ER013A]

TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A
Price:
USD$6.90
Brand:
GPM
Model:
ER013A
GTIN:
4894538259612
Condition:
Brand New
Available in shop
Write a review
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"

Precision rear bulkhead for E-REVO applications

This machined aluminium rear bulkhead is a direct replacement part intended for TRAXXAS E-REVO chassis and supplied as ER013A in a 1pc set. The component replaces the factory plastic housing to offer a stiffer mounting surface that improves gearbox and suspension pickup alignment under load.

Installation should be carried out by technicians familiar with chassis assembly: remove the original bulkhead, transfer seals or bushings into the new unit, align drivetrain and suspension mounting points, and tighten the original fasteners to specified torque values. Proper assembly sequence reduces risk to bearings and adjacent plastic components.

From an engineering standpoint, upgrading to a machined aluminium bulkhead reduces compliance at the rear mounting datum, delivering a more repeatable reference for suspension geometry and driveline alignment. The result is improved setup consistency and reduced movement during aggressive off-road use.

This item is compatible with

  • TRAXXAS E-REVO

What checks are recommended after installation?

Verify gearbox alignment, confirm suspension pickup locations, and perform a torque check on all fasteners after initial runs to ensure no settling has occurred.

Does the aluminium mount require rework to fit?

The part is produced to match standard mounting points. Minor clearance checks may be necessary on modified vehicles, but no routine rework should be required for standard builds.

Any advice for service and longevity?

Inspect mating surfaces and fasteners periodically, replace any damaged inserts, and follow recommended torque specs to maintain alignment and part life.