Axial Yeti 2.2 Precision Hub Spacers 22mm YT022B by GPM  [YT022B]

Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B
Price:
USD$11.90
Brand:
GPM
Model:
YT022B
GTIN:
4894538240191
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"
alt="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B" title="Axial Racing Yeti Aluminium 2.2 Wheel Hub Adapters (22mm Thickness)economy Version - 1pr set - GPM YT022B"

Technical Notes on 22mm Hub Spacers

This aluminium hub spacer is specified to alter wheel offset on Axial Yeti platforms using 2.2 wheels. The fixed 22mm thickness relocates the wheel mounting face outward to modify track width and stance while leaving the axle assembly unchanged.

Supplied as a single pair for scale off-road applications, the adapter is intended as a cost effective replacement to the original hub face. Installation requires removal of the wheel, inspection of hex engagement and thread seating, and use of the correct hex driver; verify wheel balance and bearing alignment after reassembly to ensure correct running.

These spacers suit modest offset adjustments for tyre clearance, body fitment and chassis setup work. Confirm wheel hex and hub dimensions before fitting to ensure proper interface and clearance on your model.

How does the 22mm spacer alter chassis geometry

The spacer shifts the wheel centerline outward by 22mm, increasing track and altering weight distribution at the tyre contact patch; expect modest changes to lateral stability and clearance.

What checks are recommended after fitting

After fitting, confirm hex engagement, thread depth and bearing alignment, then perform a slow run to check for wheel wobble or unusual vibration. Re-torque fasteners to the original settings.

Is there a risk to wheel clearance or steering geometry

A 22mm outward offset can improve clearance in many setups but may require checking steering link angles and inner wheel clearance; ensure the spacer does not create interference with suspension components.