Axial Yeti 2.2 CNC Machined Aluminium Beadlock Wheels YT1006SWF/R2 by GPM  [YT1006SWF/R2]

Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set - GPM YT1006SWF/R2
Price:
USD$55.00
Brand:
GPM
Model:
YT1006SWF/R2
GTIN:
4894538041767
Condition:
Brand New
Write a review
alt="Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set - GPM YT1006SWF/R2" title="Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set - GPM YT1006SWF/R2"
alt="Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set - GPM YT1006SWF/R2" title="Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set - GPM YT1006SWF/R2"

Precision aluminium beadlock wheels for Axial Yeti 2.2

This aluminium beadlock wheel set is engineered for scale use on the Axial Yeti platform and supplied as two pairs with a six-pole swirl finish. The beadlock system secures the tyre bead between the inner barrel and outer ring and is intended for 2.2" tyre assemblies used in trail and rock race applications.

Assembly follows standard beadlock procedure: locate the tyre bead between rings and fasten the ring-to-barrel screws evenly to achieve uniform seating. As machined aluminium components, these wheels present greater rim rigidity than injection-moulded alternatives and demand routine torque checks after initial fitment and post heavy impacts.

From a performance perspective, aluminium beadlocks change rotational inertia and can influence motor and suspension response on steep or technical terrain. Deploy them when rim durability and secure bead clamping are priorities and adjust tyre selection and damping to maintain desired traction and steering feedback.

Specifications

  • Item Axial Racing Yeti Aluminium Front/Rear 2.2 Wheels Beadlock (6 Poles Swirl) - 2prs set
  • Material Machined aluminium
  • Model Number YT1006SWF/R2
  • Compatibility Axial Racing Yeti rock racer 2.2 wheel setups

Suitable for experienced hobbyists and tuners, these beadlock wheels deliver enhanced rim durability and reliable bead security for Axial Yeti 2.2 tyre setups while requiring correct installation and periodic fastener inspection.

What checks should be done before final torqueing of the beadlock screws?

Ensure the tyre bead is uniformly seated, verify there is no pinching of the tyre bead, and run screws up in a cross pattern to bring the ring to the barrel evenly before final torqueing.

Are these wheels compatible with standard Yeti wheel hexes and splines?

They are designed for Axial Yeti 2.2 wheel assemblies; confirm hub hex and spline match your chassis to ensure proper mounting and avoid undue stress on drive components.

How should I approach suspension setup after fitting aluminium beadlocks?

Expect slightly higher rotational inertia; evaluate spring rate and damping to retain tyre contact and steering precision, and fine-tune ride height if necessary to preserve geometry.

What long term servicing is advised for machined aluminium rims?

Periodically inspect screw threads and mating surfaces, clean grit that may abrade the contact faces, and replace damaged fasteners to maintain secure beadlock performance.