Axial SCX6 Precision Carbon Steel CVD Drive Shafts SCX6037S by GPM  [SCX6037S]

AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S
Price:
USD$76.90
Brand:
GPM
Model:
SCX6037S
GTIN:
4894538356885
Condition:
Brand New
Write a review
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD Carbon Steel Front+Rear CVD Drive Shaft - 6pc set - GPM SCX6037S"

Precision CVD drive shafts for SCX6 applications

This 6 piece front and rear CVD drive shaft set is engineered for AXIAL SCX6 JEEP JLU WRANGLER 4WD layouts, providing a direct aftermarket replacement that aligns with common axle geometry. The kit services both front and rear drive positions and includes the required screw pins for retention.

Manufactured from heat-treated carbon steel, the CVD components are designed for precision engagement with axle cups and to transmit motor torque with reduced bending risk. The constant velocity configuration increases allowable transmission angle and improves load distribution compared with simple dogbone shafts, supporting higher articulation demands.

Installation requires conventional axle disassembly, removal of stock shafts, and fitting of the new CVD units using the supplied pins. Verify proper pin seating, ensure full rotational freedom through suspension travel, and torque hardware to the vehicle manufacturer's recommended values.

Specifications

  • Item: Front+Rear CVD drive shaft set - 6 pcs
  • Material: Carbon steel
  • Model Number: SCX6037S
  • Compatibility: AXIAL SCX6 JEEP JLU WRANGLER 4WD

Engineered as a durable upgrade to standard drive components, this carbon steel CVD set is intended to improve driveline durability and angle tolerance on SCX6-scale crawlers.

This item is compatible with

  • AXIAL-1/6 4WD JEEP JLU WRANGLER-AXI05000

What inspection points are recommended after fitting?

Inspect pin seating, check CV joint freeplay, confirm axle cup alignment, and run the suspension through travel to ensure there is no binding or interference.

Are these heat-treated or surface coated?

The shafts use heat-treated carbon steel for strength; any surface finish is intended to aid wear resistance and should be handled with standard maintenance practices.

How do these compare to aluminium upgrades?

Carbon steel offers higher bending strength than aluminium and is typically chosen where maximum durability and resistance to impact or flex are priorities.

What model reference should I use to confirm fit?

Use model SCX6037S when cross-referencing fitment on Axial SCX6 JLU Wrangler style drivetrains to ensure correct compatibility.