AXIAL SCX6 Motor Pinion 11T SCX6011TS technical upgrade SCX6011TS by GPM  [SCX6011TS]

AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS
Price:
USD$6.90
Brand:
GPM
Model:
SCX6011TS
GTIN:
4894538357615
Condition:
Brand New
Write a review
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 11T - 2pc set - GPM SCX6011TS"

Precision pinion for SCX6 drive upgrades

This CNC-friendly replacement pinion is engineered for direct-fit use on AXIAL SCX6 JEEP JLU WRANGLER models. Manufactured from high carbon steel for enhanced wear resistance, the small kit mounts to the motor shaft to deliver torque into the drivetrain with consistent engagement characteristics.

Measured features include an 11-tooth profile, a 5mm centre bore, and a 1mm tooth pitch. The kit includes a 4x4 screw shaft to secure the pinion to the motor shaft. Confirm shaft bore and pitch compatibility to achieve correct mesh and predictable gear life under load.

Packing includes

  • Pinion Gear - 1pcs
  • 4*4 Screw Shaft - 1pcs

Original Name / Part No:

ARA310961

Compatible Models

  • 1/6 4WD SCX6 JEEP JLU WRANGLER-AXI05000

What inspection points are recommended after install?

Check backlash and contact pattern using a marking medium, ensure the 4x4 screw shaft is secure, and recheck after a short run-in for settling.

Is material hardness specified?

The pinion uses a high carbon steel alloy chosen for durability in drive applications; confirm heat treatment and hardness as part of detailed spec checks with the supplier when required.

Recommended maintenance interval?

Inspect gear mesh and fasteners after initial break-in and periodically depending on terrain and power levels; replace if pitting or significant wear appears.