AXIAL SCX24 Precision Brass Hex Adapters 3mm SCX24010X/3M by GPM  [SCX24010X/3M]

AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M
Price:
USD$8.90
Brand:
GPM
Model:
SCX24010X/3M
GTIN:
4894538345506
Condition:
Brand New
Write a review
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3mm Thick - 8pc set - GPM SCX24010X/3M"

Precision brass hex adapters for SCX24 Deadbolt

This replacement and upgrade kit contains 3mm thick brass hex adapters engineered for AXIAL 1/24 SCX24 DEADBOLT platforms. The adapters interface wheel hubs to axle hexes to provide a robust metal mounting surface and a slight, consistent mass increase that refines slow-speed wheel behaviour. Each adapter is brass and the kit includes steel pins for mechanical retention as supplied by the manufacturer.

Functionally these adapters act as a tuning component rather than altering axle geometry: they replace plastic or thin alloy hex parts to produce firmer wheel mounting and a small increase in wheel inertia that can aid low-speed traction and control on 1/24 scale crawlers.

Packing includes

  • Hex Adapter - 4pcs
  • 1.5*5 Steel Pin - 4pcs

Original Name / Part No:

AXI31610+AXI31609

Compatible Models

  • AXIAL-1/24 4WD SCX24 DEADBOLT-AXI90081
  • AXIAL-1/24 JEEP WRANGLER JLU CRC-AXI00002

Do the adapters require reaming or fitting work?

These adapters are produced to match standard AXIAL 1/24 SCX24 hub and axle hex dimensions; in normal cases they install without additional machining, though minimal cleaning of mating surfaces is recommended.

How should I check pin alignment during assembly?

Align the adapter with the hub and ensure the 1.5x5 pin holes line up before pressing pins; use a small punch to seat pins and verify retention by rotating the wheel under light load.

Will the brass contact accelerate wear on hubs?

Brass is harder than typical hub plastics but softer than steel; it provides a durable mating surface while distributing load differently than plastic, so inspect mating components periodically for wear patterns.