Axial SCX10 Precision 48 Pitch 81T Steel Spur Gear SSCX081T by GPM  [SSCX081T]

Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T
Price:
USD$11.90
Brand:
GPM
Model:
SSCX081T
GTIN:
4894538165876
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"

Precision 81T Steel Spur for SCX10

Single-piece 81 tooth spur fabricated from steel #45 for use in 48 pitch drivetrains on Axial SCX10 and Wraith platforms. The component is supplied as one unit and matches the dimensional requirements of standard 48 pitch gear trains.

Intended as a durable replacement, this spur requires a matching 48 pitch pinion; install using original hardware and verify backlash and tooth engagement under light load to ensure correct alignment and longevity.

This steel #45 spur is specified for applications where improved wear life and load tolerance are required, such as frequent crawling or heavy trail duty; confirm tooth count and pitch when specifying gear ratios.

Compatible Models

  • SCX10
  • Wraith

What inspection checks should I run after fitting?

Verify radial runout, ensure even tooth contact across the mesh, and confirm the retaining method is secure; recheck after the first few test runs.

How does steel #45 compare to other steels?

Steel #45 offers a good balance of hardness and toughness for spur applications, providing superior wear resistance versus softer metals while remaining economical for upgrade use.

Any recommendations for mesh setup with SSCX081T?

Start with a light running clearance, rotate the drivetrain slowly to check contact pattern, then tighten retaining screws and recheck under load to avoid premature tooth wear.