AXIAL SCX10 II Precision Brass Gearbox Cover SCX2012AX by GPM  [SCX2012AX]

AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX
Price:
USD$21.90
Brand:
GPM
Model:
SCX2012AX
GTIN:
4894538321807
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"

Precision brass gearbox cover for SCX10 II systems

This precision machined brass front/rear gearbox cover is an aftermarket upgrade for AXIAL SCX10 II chassis and compatible housings. The brass construction offers protective shielding for differential gears while providing a deliberate ballast mass to tune vehicle balance for scale crawling applications.

The cover is engineered to seat tightly against bearing surfaces to reduce lateral play around the differential assembly, which supports more consistent gear engagement during low-speed, high-load crawling. A service access port is integrated for straightforward oil or grease top-ups without full cover removal.

Retention uses the supplied stainless steel 2.5x16 cap head screws and follows standard SCX10 II gearbox access procedures. The documented mass is 35 grams; consider this when setting suspension preload and static ride height to retain desired handling characteristics.

Packing includes

  • Gearbox Cover - 1pcs
  • Stainless Steel Cap Head Screw 2.5x16 - 4pcs

Original Name / Part No:

AX31384

Specifications

  • Item: Brass gearbox cover
  • Material: Brass
  • Model Number: SCX2012AX
  • Compatibility: AXIAL SCX10 II chassis
  • Weight: 35 grams
  • Part Location: Front/rear gearbox area
  • Includes: 1 gearbox cover, 4 stainless steel cap head screws 2.5x16

Recommended where increased gearbox protection and controlled ballast are required on SCX10 II builds; verify bearing interface and screw torque during final assembly for best reliability.

This item is compatible with

  • AXIAL SCX10 II
  • AXIAL SCX10 II 90047

What tolerance is required at the bearing interface?

Aim for minimal lateral clearance at the bearing seat so the cover supports the differential without binding; check rotation after fitting to confirm free movement.

Can I use different fasteners with this cover?

The supplied 2.5x16 stainless cap head screws match the intended flange depth; if substituting, ensure equivalent length and head profile to avoid interference with bearings or seals.

How should I account for the 35 g mass in setup?

Treat the cover as a concentrated ballast at the gearbox location when tuning spring rates and damping; small adjustments to shocks or roll bar settings can restore desired handling balance.

Is the oil-fill port sized for common gear oils?

The integrated access aperture is designed for routine gear oil and grease top-ups; use a syringe or small nozzle to control fill volume and avoid overfilling.