AXIAL SCX10 II Aluminium Internal Shock Upgrade 95mm SCX2095X by GPM  [SCX2095X]

AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X
Price:
USD$21.90
Brand:
GPM
Model:
SCX2095X
GTIN:
4894538006001
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X" title="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X" title="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X" title="AXIAL Racing SCX10 II Aluminium Front/Rear Internal Shocks (95mm) With Engraving (AX80029) - 1pr set - GPM SCX2095X"

Precision aluminium internal shocks specified for SCX10 II

These 95mm aluminium internal shocks are presented as an aftermarket upgrade for the AXIAL Racing SCX10 II platform and are dimensioned for the SCX-10 II Jeep Cherokee chassis. Supplied as a 1pr set for front and rear use, they are aimed at scale rock crawling where compact, oil-damped internals are required.

Design pairs an aluminium shock cylinder with a corrosion-resistant stainless steel shaft and Delrin collars to support the oval-section internal springs. The reticulated X-type engraving on the outer cylinder provides a three-dimensional finish while retaining functional integrity. Oval springs are selected to reduce concentrated contact with the bore and promote consistent stroke behaviour.

Units are delivered oil-filled and assembled to allow drop-in replacement on the specified chassis. From a setup perspective they act as a tunable platform: change shock oil viscosity or replace internal springs to refine damping, articulation, and ride characteristics for specific crawling lines.

Specifications

  • Item: Aluminium front/rear internal shocks, 1pr set
  • Material: Aluminium cylinder, stainless steel shaft, Delrin spring collars
  • Model Number: SCX2095X
  • Compatibility: AXIAL Racing SCX10 II (SCX-10 II Jeep Cherokee) chassis
  • Length: 95mm
  • Spring: Oval internal spring design with Delrin collars
  • Features: Reticulated X-type engraving on outer cylinder, oil-filled, assembled

For SCX-10 II builders seeking a robust aluminium internal shock option, this pre-assembled set delivers durable shafting and engineered Delrin seating for improved spring alignment and repeatable damping performance. by GPM

This item is compatible with

  • AXIAL SCX10 II
  • AXIAL SCX10 II 90047

What mounting checks should a technician perform?

Confirm eyelet spacing, mounting angle, and clearance at full droop and compression to ensure proper fitment on the SCX-10 II Jeep Cherokee layout.

Is the shock oil user serviceable?

Yes, the units can be serviced to change oil viscosity for tuning; perform maintenance in a clean bench environment and inspect seals and collars during service.

How do Delrin collars affect spring behaviour?

Delrin collars provide stable spring seating and reduce abrasive wear between spring and cylinder bore, promoting consistent damping over repeated cycles.

What is the recommended tuning workflow?

Establish baseline with stock oil and springs, record behaviour on representative obstacles, then iterate by adjusting oil weight for rebound and swapping springs to refine load and articulation.