Axial SCX-10 II Adjustable Aluminium Front Shock Hoops SCX2028 by GPM  [SCX2028]

AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028
Price:
USD$23.90
Brand:
GPM
Model:
SCX2028
GTIN:
4894538078626
Condition:
Brand New
1 Reviews
Write a review
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"
alt="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028" title="AXIAL Racing SCX10 II Aluminium Front Shock Hoops - 1pr set (AX31380) - GPM SCX2028"

Precision front shock hoop for SCX-10 II applications

This aluminium front shock hoop is a precision-engineered mounting tower intended for front damper installation on Axial SCX-10 II vehicles. It provides a stable upper attachment point that secures shock eyelets and permits repeatable tuning of ride height and damping geometry. The adjustable mounting holes allow incremental changes to shock angle and effective travel without structural chassis changes.

Designed as a rigid mounting reference, the hoop supports top-end shock alignment rather than acting as a damping element. It integrates into the SCX-10 II front assembly and is suitable for both original-fit and many aftermarket shock designs developed for the platform.

Installation guidance: position the hoop on the front tower using existing chassis locations, secure with the specified fasteners, and verify alignment through full suspension travel before final torque. Use the selectable upper mounting positions to refine spring rate leverage and shock motion for competitive trail setups.

Compatible Models

  • Axial SCX-10 II Jeep Cherokee

A direct-fit aluminium hoop offering a firmer, adjustable upper mount for front dampers on SCX-10 II crawlers, intended to improve consistency and tuning precision in demanding terrain.

 

Product Reviews
1 Reviews
rating
Great experience and service. I have been very satisified

How does changing the top mount affect shock leverage?

Moving the upper eyelet alters the shock pivot angle and effectively changes the leverage ratio at the wheel; this impacts compression feel and the shock travel curve, which can be used to tune stability versus compliance.

What checks ensure correct installation?

Confirm torque on tower fasteners, verify shock alignment at full droop and full bump, and ensure upper eyelets do not bind against adjacent components during steering and articulation.

Are there recommended shock types for extended travel setups?

Long-travel or rebuildable shocks can be used if their eyelet spacing and overall length are compatible with the chosen mount position; measure clearance at full compression and steering lock before committing to the setup.

Maintenance best practice for aluminium mounts?

Regularly inspect mounting fasteners for secure fit, clear debris from mating surfaces, and check for wear at hole interfaces; replacing worn hardware preserves repeatable geometry.