AXIAL SCX10 II +3mm Aluminum Hex Hub Upgrade SCX2010D+3MM by GPM  [SCX2010D+3MM]

AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM
Price:
USD$13.90
Brand:
GPM
Model:
SCX2010D+3MM
GTIN:
4894538314908
Condition:
Brand New
Write a review
alt="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM" title="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM"
alt="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM" title="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM"
alt="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM" title="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM"
alt="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM" title="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM"
alt="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM" title="AXIAL SCX10 II Aluminum +3mm Hex With Brake Disk With Silver Lining-4pc set - GPM SCX2010D+3MM"

Technical overview

Lightweight aluminum hex hub set manufactured for AXIAL SCX10 II chassis as an aftermarket upgrade to offset each wheel 3mm outward from a 5mm reference. The components interface with the front and rear wheel shafts to retain steering responsiveness while delivering an increased track for enhanced lateral stability.

Key functional notes drawn from the product details:

  • Widened track: hub geometry yields an 8mm offset versus the original 5mm, improving lateral stability during scale crawling and technical trail use.
  • Secure mounting: the hub profile is engineered to clamp the wheel hex firmly, minimising rotational play under load and supporting improved climbing performance.
  • Finish and form: machined metallic appearance with swirl engraving on the outer ring offers a precision look suitable for detailed scale builds.

Included items are listed from the product data, use them as supplied to secure the hubs:

  • Brake Disk - 2 pcs
  • M4x2x12 Stainless Steel Pin - 2 pcs

Installation and tuning role: intended as an aftermarket replacement for AXIAL SCX10 II wheel/axle interfaces to alter track width and stance. When installed, these hubs become the primary wheel mounting point and a tuning component to balance cornering and climbing dynamics; verify wheel hex and axle compatibility prior to final assembly.

This item is compatible with

  • AXIAL SCX10 II

What is the exact offset change with these hubs?

The design moves each wheel 3mm outward compared with a 5mm reference, producing an effective 8mm offset relative to that baseline.

Are the mounting pins corrosion resistant?

The kit includes M4x2x12 stainless steel pins as listed, offering good resistance to corrosion under normal use conditions.

Do I need to modify the axle or wheel hex?

No machining should be required for standard AXIAL SCX10 II interfaces, but confirm your wheel hex profile and axle stub dimensions before installation to ensure correct fitment.