Axial SCX10 II 1.9" CNC Aluminum 6-Pole Crawler Wheels AW1906H by GPM  [AW1906H]

1.9" CNC aluminium 6-pole wheel set

The AW1906H wheel and tyre assembly is supplied as a 2 pcs set tailored for 1/10 scale crawlers that accept 1.9" tyres with a 5mm shaft hole and 12mm hex. The CNC machined aluminium wheel employs a six-pole geometry and incorporates a brass pendulum weight to bias rotational mass downward, aiding tyre contact at high articulation and low crawl speeds.

The tyre fitted to these wheels has deep longitudinal lugs and a broad footprint to maximise low-speed mechanical grip on rock and technical terrain. Source dimensions are outer tyre diameter 115mm, inner diameter 48.26mm (1.9"), tyre width 40mm, and nominal single wheel weight 100g. Wheels accept standard 12mm hex mounting and are intended for RC-scale upgrades and tuning.

Technical fitting guidance: verify 5mm axle shaft diameter and 12mm hex compatibility, confirm hub backspace and inner clearance, and ensure wheel orientation so the brass pendulum weight hangs downward to achieve the designed mass bias. The product is supplied as 2 pcs per set.

Recommended where added unsprung wheel mass and deep tread are deliberate tuning choices for improving low-speed traction on technical trails; confirm mechanical fitment before installation.