Axial SCX10 Honcho Precision Alloy Front C-Hub SCX019 by GPM  [SCX019]

Precision alloy front C-hub engineered for SCX10 Honcho

This aftermarket alloy front C-hub is engineered specifically for the Axial Racing SCX10 Honcho and is designated model SCX019. Manufactured with attention to fit and finish, the part is intended as a direct replacement that preserves the stock mounting geometry while upgrading the hub material for durability and repeatable performance.

Material and role: SCX019 uses cast and machined alloy to provide a stiffer, more stable mounting surface for the steering knuckle compared with polymer parts. The machined contact faces are specified to reduce fretting and to offer a durable bearing area where the axle and kingpin locate.

Installation notes: remove the wheel and knuckle assembly, transfer compatible kingpins and fasteners, and verify engagement with your steering knuckles and axle shafts during trial assembly. Use appropriate hex tooling and torque practice, avoid over-torquing, and confirm full steering travel and clearance after installation. Apply thread locker only at recommended metal-to-metal joints.

Tuning guidance: upgrading to an alloy hub will modify front-end stiffness and feedback; after fitting, check toe, caster and linkage geometry and use shims or link length adjustments to optimise steering response. Regular inspection of the machined contact surfaces and fastener security is recommended for demanding trail and crawler operation.