Axial SCX10 CNC Adjustable Link Set 315mm SCX15049/315 by GPM  [SCX15049/315]

Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315
Price:
USD$32.90
Brand:
GPM
Model:
SCX15049/315
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315" title="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315" title="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315" title="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315" title="Axial Racing SCX10 Aluminium Adjustable Link Parts With Mount For 315mm Wheelbase - 7pcs set - GPM SCX15049/315"

Precision adjustable aluminium links for 315mm SCX10 applications

This precision aluminium adjustable link assembly is engineered as an aftermarket upgrade for Axial Racing SCX10 chassis configured to a 315mm wheelbase. The seven piece set pairs threaded rod adjusters with machined mounting ends to allow exact length settings for steering and suspension linkages, providing repeatable adjustments without altering original link hardware.

For installation, remove stock links and migrate compatible ball ends or install the appropriate retainers. Set each rod to the required length, ensure symmetric alignment left to right, then secure with the lock nuts to prevent movement under load. Maintain original mount orientation to preserve designed roll centre and steering geometry. This product is for RC model use only.

In setup and tuning workflows the threaded adjusters enable incremental correction of toe, caster and anti-squat, and they simplify fitting alternative axles that change effective wheelbase. Aluminium offers superior dimensional stability over softer materials; inspect thread engagement and mount faces after heavy use and replace any worn end fittings to maintain performance.

Specifications

  • Item: Adjustable link parts with mount, 7 pcs set
  • Material: Aluminium
  • Model Number: SCX15049/315
  • Compatibility: Axial Racing SCX10 chassis, 315mm wheelbase

Recommended for builders who require precise, lockable linkage adjustment on a 315mm SCX10; verify full thread engagement and retorque lock nuts after initial testing to ensure consistent tuning results.

What tolerance should I expect when setting lengths?

Threaded adjusters provide submillimetre resolution depending on thread pitch; use calipers or a setup gauge for repeatable settings and match left and right measurements.

Are the mounts CNC machined or cast?

The kit uses machined aluminium mounting ends designed for durable contact with ball ends or retainers; inspect mating faces during installation to ensure correct seating and minimal play.

How should I verify secure installation?

After fitting, confirm full thread engagement on both ends, torque lock nuts so they resist rotation under load, and perform a static and dynamic check of alignment before trail use.

What wear points should I monitor?

Monitor thread integrity, mount bore faces and ball end seats for deformation or wear; replace worn ball ends and clean threads regularly to maintain accurate adjustment.