Axial SCX10 Alloy 14mmx9mm Hex Adapter Upgrade - AX010/14X9MM by GPM  [AX010/14X9MM]

CNC-style alloy hex adapter for 14x9mm conversions

The AX010/14X9MM is a four-piece alloy hex adapter set designed to convert wheel mounting interfaces to a 14mmx9mm hex pattern for Axial EXO, SCX10 and Wraith platforms. Supplied as a matched set for one axle, the adapters provide consistent wheel seating for aftermarket wheel installations.

These adapters act as the mechanical contact between hub and wheel, controlling lateral position and alignment when changing wheels or offsets. The alloy construction offers a balance of weight and stiffness appropriate for scale crawler use.

Installation procedure: verify hex engagement and ensure the adapter faces are fully seated against the hub prior to final torque. Use the specified hex driver for wheel screws, check for any endplay after initial testing, and re-torque hardware after a short run-in. Apply threadlocker to wheel fasteners where your standard practice requires it.

Performance tuning: use these low-profile adapters to incrementally adjust track width and wheel stance to optimise clearance and handling with beadlock or aftermarket wheels on EXO, SCX10 and Wraith chassis.