ARRMA TALION 6S EXB Rear Brace & Skid Plate 7075 Alloy - MTV616330R by GPM  [MTV616330R]

ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R
Price:
USD$43.90
Brand:
GPM
Model:
MTV616330R
Condition:
Brand New
Write a review
alt="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R" title="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R"
alt="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R" title="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R"
alt="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R" title="ARRMA TALION 6S EXB 7075 Alloy Rear Brace And Rear Chassis Skid Plate Brace 6mm - GPM MTV616330R"

7075 rear brace and skid plate for TALION 6S EXB

This aftermarket rear brace and rear chassis skid plate is an RC-strengthening component intended for the ARRMA TALION 6S EXB platform. Machined from 7075 alloy in a precision CNC one-piece process, it mounts to the rear section to reduce flex where the skid meets the chassis while maintaining a lightweight profile.

The piece replaces the factory ARA-3402 rear brace and fits with the included hardware; small parts arrive pre-assembled to simplify the installation. We recommend medium-strength threadlocker on metal screws to prevent loosening caused by vibration during use.

Installation notes: the brace pairs with the rear chassis skid plate and uses the included grade 12.9 black flat head screws and an M4 nut; some teardown of the rear section is necessary to access mount points and a 4mm drill bit is supplied for minor alignment. Standard hex drivers are sufficient to perform the swap.

Compatible Models

  • ARRMA 1/7 TALION 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6

Provided as a direct-fit replacement, this part increases rear rigidity and protects the chassis for aggressive offroad driving on the TALION 6S EXB platform.

What ARRMA model does this suit?

It suits the ARRMA 1/7 TALION 6S EXB 4X4 RTR (ARA7707V6) and is made to substitute the stock rear brace directly.

How is the part manufactured?

Manufactured from 7075 aluminium via one-piece CNC machining to achieve consistent dimensions and robust strength for RC chassis service.

Are alignment tools included?

Yes, the kit includes a 4mm drill bit for minor alignment along with the required screws and an M4 nut. Hand tools like hex drivers are not included.

Is threadlocker necessary?

Use a medium-strength threadlocker on metal-to-metal fasteners to reduce the likelihood of screws backing out from vibration while still allowing service removal.

Will this affect vehicle handling?

Increasing rear stiffness can reduce flex and provide a more stable platform for suspension tuning, which may subtly change handling characteristics depending on setup.

Is the part ready to fit out of the box?

The CNC-machined part is supplied ready for installation; verify hardware lengths and apply threadlocker where recommended during assembly for best durability.