GPM MG323T/0.8M 40CR Steel 23T Motor Gear  [MG323T/0.8M]

Price:
USD$7.90
Brand:
GPM
Model:
MG323T/0.8M
GTIN:
4894538405323
Condition:
Brand New
Write a review

Precision 40CR steel pinion for durable drivetrain performance

The GPM MG323T/0.8M motor gear is CNC finished and hardened 40CR steel with a 23 tooth profile for 32 pitch gear trains. Its 0.8mm module and 3.175mm motor tooth diameter maintain correct mesh geometry across common hobby motors, delivering predictable wear characteristics under sustained torque. This component is intended as a direct replacement or upgrade where enhanced material strength and consistent tooth form extend service life in demanding running conditions.

Packing includes

  • 1 x 40CR Steel Motor Gear 23T

Original Name / Part No:

  • 40CR Steel Motor Gear 23T (32 Pitch,Module: 0.8mm,Motor Tooth Diameter: 3.175mm) - GPM MG323T/0.8M

What is the correct mesh procedure for this pinion?

Set initial mesh with a single sheet of paper between pinion and spur, then back off slightly and secure the pinion. Recheck after a short run to confirm no binding and minimal backlash compatible with your gearbox.

Is heat treatment specification provided?

The gear is supplied in hardened 40CR steel for improved wear resistance. For extreme duty use, ensure correct lubrication and consider periodic inspection for stress signs.

What shaft diameter does the 3.175mm refer to?

The 3.175mm figure is the motor tooth diameter measurement used for compatibility with standard 5/40 size motor shafts; verify your motor shaft or use appropriate adapter where required.